BEVEL PLASMA CUTTING MACHINES

PRODUCT CODE: BPCM

BEVEL PLASMA CUTTING MACHINE

Bevel palsma cutting is the process of cutting a part with an edge that is not perpendicular to the top of the piece. Bevel cutting increases the surface area so that a stronger and safer source is obtained. There are many different types of bevel cutting.

In traditional cutting methods, it is necessary to trial and error to get the desired result from bevel cutting but Plasma Cutting Machinery has improved the speed, repeatability and accuracy of bevel cutting considerably by using newer technologies.
Beveled edges are a requirement for welding preparation and other final mounting methods.
Bevel cutting is often used in industries where heavy equipment is used for road, construction, agriculture, forestry, oil and gas, mining and shipbuilding applications. In these industries, manufacturers use bevel cutting as part of the welding preparation process. Beveled edges produce a more durable type of welding that is needed to support heavy loads in such machines and structures.

3D PLASMA BEVEL CUTTING HEAD SYSTEM

Cutting head can implement progressive and continuous cutting at X, Y, Z, Rotate and TILT axes. Cuts can reach to 50 mm thickness on black iron sheet at 450 + 20 by means of Hypertherm HPR400XD plazma cutting system. Axes are driven with Harmonic Drive motors, patented product of Harmonic Drive AG.

  • Ability to cut at 5 axes continuously.
  • Inclined cutting of parts with complicated geometry.
  • Time effectiveness during welded installation works.
  • Performance of both cutting and welding grooving processes in single operation.

On both axes Harmonic Drive i:50 transmission rated drive motors employed. Height Control is being implemented with Arc Voltage surveillance and sensitive screwed axle is being performed via linear skid including module and sensors. Module speed can reach till 10.000 mm/min magnetic separation plates and proximity sensors are employed for collision control. Thus, damaging torch due to collision during operation is prevented.

Sending cutting head to 0 point on both axes maintained electronically by means of a single button. As out Harmonic Drive motors are installed into the specially designed sleeve body full protection against damaging is maintained. Continuous inclined cutting process is being maintained via Pronest and Hypeterm control software. True Hole technology supplied by Hypeterm is increasing the quality on bevel product. Sensitive cutting can be maintained with minimum loss by means of fine resetting of the part via laser diode installed onto the bevel cutting head.

GENERAL FEATURES OF BEVEL PLASMA CUTTING MACHINE

  • Positioning speed of 10,000 mm / min
  • Lifting Positioning speed of
    30,000 mm / min
  • Elevation Control Sensitivity 2 min terms
Alt
  • Tilt Y positioning Torch Angle ± 45∞2∞
  • Torch Removal Stroke 300 mm
  • Tilt X Positioning speed of
    30,000 mm / min

PHOTOS OF BEVEL PLASMA CUTTING MACHINE

Get more information or quotation about our products.

Please send us your inquiries or request a quote. We will answer as soon as possible.

Get Quotation

TOP